5240113410 Cylinder Liner Size 0. Request a part-number and engine-serial check before quotation. 2 superseded references traced on record.

5240113410 Cylinder Liner Size 0 - MTU Pistons and liners catalog reference
Part No. 5240113410Name Cylinder Liner Size 0Designation (DE) Zylinderlaufbuchse Größe 0Category Pistons and linersEngine Type MTU 4000Series MTU 4000Catalog Weight Confirmed with quotationHS Code (reference) 84099900 Delivery Global shipping
Availability confirmed after inquiry

Check 5240113410 availability: Start with 5240113410 and the quantity. Add an engine serial number or a photo of the old Cylinder Liner Size 0 if available; we will follow up on any missing details.

5240113410 Specification

Part No.
5240113410
Name
Cylinder Liner Size 0
Designation (DE)
Zylinderlaufbuchse Größe 0
Category
Pistons and liners
Engine Type
MTU 4000
Series
MTU 4000
Catalog Weight
Confirmed with quotation
HS Code (reference)
84099900
Lead Time
Confirmed with quotation
Availability
Stock, replacement status, lead time, and shipping route confirmed after inquiry.

About 5240113410 - Cylinder Liner Size 0

Pistons, liners, and rings are size-graded components. Incorrect grade selection causes premature wear or seizure. We verify size code, engine series, and serial number before quotation. OEM and OEM-alternative grades available.

Technical Notes: Pistons and liners

Pistons, rings, and wet cylinder liners form the combustion chamber and carry the highest thermal loads in the engine. They are usually replaced during a major overhaul, and liner protrusion and size grades have to be checked so the cylinder head seals correctly.

When This Type of Part Is Usually Replaced

  • oil consumption or blow-by rises beyond the expected level
  • borescope inspection shows liner scoring, bore polishing, or ring damage
  • liner cavitation is found on the coolant side

Checks Before Ordering

  • Order liners with their sealing rings, and pistons with complete ring sets
  • Size grades and weight classes must be matched within one engine
  • Measurements from the inspection record decide which grade to order

Engine Catalog References

5240113410 is listed for 3 engine models in the catalog references. The specification table decodes each model code from the fitment list; it does not confirm every installation.

Engine models listed for 5240113410
ModelCylindersArrangementApplicationGroup / build
12V 4000 M70 12 V marine subgroup 7, build 0
16V 4000 M90 16 V marine subgroup 9, build 0
20V 4000 M93 20 V marine subgroup 9, build 3

How Each Model Code Reads

  • 12V 4000 M70: 12 cylinders in V arrangement, Series 4000, marine application (M), subgroup 7, build generation 0
  • 16V 4000 M90: 16 cylinders in V arrangement, Series 4000, marine application (M), subgroup 9, build generation 0
  • 20V 4000 M93: 20 cylinders in V arrangement, Series 4000, marine application (M), subgroup 9, build generation 3

Full parts list for this model family: MTU 4000 M53R to M93L Parts List

Engine-series references do not confirm every installation. Final fitment of 5240113410 depends on the full engine serial number and assembly position.

Common Replacement Scenarios

This part is commonly replaced when:

  • Cavitation erosion on water-jacket side
  • Wear ridge at top ring travel — check at major overhaul
  • Scuffing from coolant contamination

Cross-Reference and Superseded Part Numbers

Catalog history distinguishes earlier and later numbers where documented. Reference-only entries do not establish replacement direction or interchangeability. Confirm the offered number against the engine serial number and installation.

References relative to 5240113410
Part numberCatalog relationship
5240113510Reference only; direction unconfirmed
5240114210Reference only; direction unconfirmed

Common Applications

  • Major overhaul
  • In-frame rebuild
  • Marine engine service
  • Industrial engine repair

Information to Send for Quotation

  • Exact part number: 5240113410
  • Part name or assembly position: Cylinder Liner Size 0
  • Engine model / series: MTU 4000
  • Engine serial number from nameplate
  • Old-part photo showing number, connector, port, or size marking
  • Required quantity and whether partial shipment is acceptable
  • Destination country, delivery deadline, and preferred shipping method

The quotation confirms the offered part number, supply condition, price, lead time, and shipping options.

Ordering Notes

Always verify size grade (0/1/2) via engine serial number before ordering. Replace liner, piston rings, and sealing rings as a set.

5240113410 FAQ

Does 5240113410 fit MTU 4000?

5240113410 Cylinder Liner Size 0 is checked against MTU 4000. Final fitment depends on the engine serial number, rating, and installation position.

What information is needed to quote 5240113410?

Send the part number, engine model, engine serial number, old-part photo, quantity, destination country, and required delivery date. This lets us confirm stock route, packing, and shipping options.

Can you check alternatives or superseded numbers for 5240113410?

5240113410 may relate to 5240113510, 5240114210. Final replacement status is checked against the engine serial number before quote.

When is 5240113410 usually replaced?

Cavitation erosion on water-jacket side; Wear ridge at top ring travel — check at major overhaul; Scuffing from coolant contamination.

Verification Notes

  • Confirm engine model, serial number, required quantity, and destination before ordering.
  • Send old part photos or nameplate details when markings or replacement status are unclear.
  • Priority item: part number, supersession, and export packing details are checked before quote.

Related MTU Parts

Similar to Cylinder Liner Size 0 by engine series or category.

Browse More MTU Parts

All MTU part numbers / MTU spare parts / Check this part

WhatsApp Check Parts