5802040806 Impeller. Listed in MTU 956 catalog references; confirm installation and current availability before ordering.

Impeller 5802040806 for MTU 956 engines
Part No. 5802040806Name ImpellerDesignation (DE) LaufradCategory Cooling systemEngine Type MTU 956/1163 ENGINESeries MTU 956Catalog Weight 2.377 KGHS Code (reference) 84139100 Delivery Global shipping
Availability confirmed after inquiry

Check 5802040806 availability: Start with 5802040806 and the quantity. Add an engine serial number or a photo of the old Impeller if available; we will follow up on any missing details.

5802040806 Specification

Part No.
5802040806
Name
Impeller
Designation (DE)
Laufrad
Category
Cooling system
Engine Type
MTU 956/1163 ENGINE
Series
MTU 956
Catalog Weight
2.377 KG
HS Code (reference)
84139100
NATO No.
2930123479029
Lead Time
Confirmed with quotation
Availability
Stock, replacement status, lead time, and shipping route confirmed after inquiry.

About 5802040806 - Impeller

Published catalog details are identification references. They do not establish current stock, supplied condition, or confirmed fitment for your engine.

5802040806 is an impeller from the coolant pump group of MTU 956 engines. It is the later number for 5802040506, so lists quoting that number are normally supplied as 5802040806. The catalog unit weight is 2.377 kg, which we use to estimate freight before quoting.

Technical Notes: Cooling system

The cooling system removes heat from the cylinder liners, cylinder heads, lube oil, and charge air. Marine MTU engines usually combine an engine coolant circuit with a seawater circuit through heat exchangers, while generator engines often use radiators. Coolant quality has a direct effect on liner cavitation and pump seal life.

When This Type of Part Is Usually Replaced

  • coolant leaks from the pump weep hole indicate seal wear
  • engine temperature rises under load or fluctuates, pointing to thermostats or flow problems
  • seawater pump impellers show cracked or missing vanes at inspection

Checks Before Ordering

  • Replace thermostats and their seals together, and check the opening temperature on the replacement
  • Seawater pump impellers should be kept as onboard spares for marine engines
  • Flush and refill with an approved coolant after replacing pumps or heat-exchanger parts

Engine Catalog References

5802040806 is listed for 10 engine models in the catalog references. The specification table decodes each model code from the fitment list; it does not confirm every installation.

Engine models listed for 5802040806
ModelCylindersArrangementApplicationGroup / build
12V 956 TB82 12 V — build 2
16V 956 TB82 16 V — build 2
20V 956 TB82 20 V — build 2
12V 956 TB92 12 V marine build 2
16V 956 TB92 16 V marine build 2
20V 956 TB92 20 V marine build 2
12V 956 TB33 12 V generator sets build 3
16V 956 TB33 16 V generator sets build 3
20V 956 TB33 20 V generator sets build 3
20V 956 TB34 20 V generator sets build 4

How Each Model Code Reads

  • 12V 956 TB82: 12 cylinders in V arrangement, Series 956, turbocharged, charge-air code TB, application group 8, build 2
  • 16V 956 TB82: 16 cylinders in V arrangement, Series 956, turbocharged, charge-air code TB, application group 8, build 2
  • 20V 956 TB82: 20 cylinders in V arrangement, Series 956, turbocharged, charge-air code TB, application group 8, build 2
  • 12V 956 TB92: 12 cylinders in V arrangement, Series 956, turbocharged, charge-air code TB, application group 9 (marine), build 2
  • 16V 956 TB92: 16 cylinders in V arrangement, Series 956, turbocharged, charge-air code TB, application group 9 (marine), build 2
  • 20V 956 TB92: 20 cylinders in V arrangement, Series 956, turbocharged, charge-air code TB, application group 9 (marine), build 2
  • 12V 956 TB33: 12 cylinders in V arrangement, Series 956, turbocharged, charge-air code TB, application group 3 (generator sets), build 3
  • 16V 956 TB33: 16 cylinders in V arrangement, Series 956, turbocharged, charge-air code TB, application group 3 (generator sets), build 3
  • 20V 956 TB33: 20 cylinders in V arrangement, Series 956, turbocharged, charge-air code TB, application group 3 (generator sets), build 3
  • 20V 956 TB34: 20 cylinders in V arrangement, Series 956, turbocharged, charge-air code TB, application group 3 (generator sets), build 4

Full parts list for this model family: MTU 956 TB33 to TB92 Parts List

Engine-series references do not confirm every installation. Final fitment of 5802040806 depends on the full engine serial number and assembly position.

Cross-Reference and Superseded Part Numbers

Catalog history distinguishes earlier and later numbers where documented. Reference-only entries do not establish replacement direction or interchangeability. Confirm the offered number against the engine serial number and installation.

References relative to 5802040806
Part numberCatalog relationship
5802040506Listed earlier number

Other Parts in the Same Assembly Group

Catalog descriptions for MTU 956 engines list these part numbers under the coolant pump. The grouping follows the catalog text; it is not a confirmed kit list or a drawing revision. Parts in the same group are often renewed together, but each reference still needs its own fitment check against the engine serial number.

Other catalog references in the same assembly group
Part numberDescription
5802040801 Spiral Housing
5802040072 Nut
700429100000 O-Ring
5842040257 Seal Carrier
5849900851 Nut

All assembly group on this page are collected in the assembly & BOM reference index.

Common Applications

  • Marine cooling systems
  • Industrial radiator systems
  • Generator cooling

Information to Send for Quotation

  • Part number: 5802040806
  • Engine model, rating, and serial number
  • Nameplate photo and old part photo when available
  • Quantity, destination country, and required delivery date

The quotation confirms the offered part number, supply condition, price, lead time, and shipping options.

5802040806 FAQ

Is 5802040506 replaced by 5802040806?

Catalog history lists 5802040806 as the later number for 5802040506. Orders quoting that number are normally supplied as 5802040806; we confirm the change against the engine serial number, because a later number can come with related changes to mating parts.

Verification Notes

  • For 5802040806, confirm engine model, serial number, required quantity, and destination before ordering.
  • If 5802040806 markings or replacement status are unclear, send old-part photos or nameplate details.

Related MTU Parts

Similar to Impeller by engine series or category.

Other Service Parts in This Engine Series

Related MTU 956 service categories. Each item requires its own fitment check.

Browse More MTU Parts

All MTU part numbers / MTU spare parts / Check this part

WhatsApp Check Parts