5240332630 Crankshaft Bearing Aux PTO End. Listed in MTU 4000 catalog references; confirm installation and current availability before ordering.
Check 5240332630 availability: Start with 5240332630 and the quantity. Add an engine serial number or a photo of the old Crankshaft Bearing Aux PTO End if available; we will follow up on any missing details.
5240332630 Specification
About 5240332630 - Crankshaft Bearing Aux PTO End
Published catalog details are identification references. They do not establish current stock, supplied condition, or confirmed fitment for your engine.
5240332630 is a crankshaft bearing aux PTO end catalogued for MTU 4000 engines. The catalog unit weight is 2.780 kg, which we use to estimate freight before quoting.
Technical Notes: Bearings
Main and connecting-rod bearings support the crankshaft and run on a thin oil film. MTU bearings are supplied in size grades to suit original and reground crankshafts, so the size marked on the old shells or on the crankshaft record has to be known before ordering.
When This Type of Part Is Usually Replaced
- the engine reaches its major-overhaul interval
- oil analysis or filter inspection shows bearing material
- oil pressure loss or knocking points to bearing wear
Checks Before Ordering
- Confirm the size grade (for example size 0 or an undersize) from the old shells or crankshaft measurements
- Replace bearings as complete sets per crankshaft journal type
- Thrust bearings and washers should be checked together with the main bearings
Engine Catalog References
5240332630 is listed for 12 engine models in the catalog references. The specification table decodes each model code from the fitment list; it does not confirm every installation.
| Model | Cylinders | Arrangement | Application | Group / build |
|---|---|---|---|---|
| 8V 4000 R43 | 8 | V | rail | subgroup 4, build 3 |
| 8V 4000 R43L | 8 | V | rail | subgroup 4, build 3 |
| 12V 4000 R43 | 12 | V | rail | subgroup 4, build 3 |
| 12V 4000 R43L | 12 | V | rail | subgroup 4, build 3 |
| 16V 4000 R43R | 16 | V | rail | subgroup 4, build 3 |
| 16V 4000 R43 | 16 | V | rail | subgroup 4, build 3 |
| 16V 4000 R43L | 16 | V | rail | subgroup 4, build 3 |
| 20V 4000 R43 | 20 | V | rail | subgroup 4, build 3 |
| 20V 4000 R43L | 20 | V | rail | subgroup 4, build 3 |
| 20V 4000 R63R | 20 | V | rail | subgroup 6, build 3 |
| 20V 4000 R63 | 20 | V | rail | subgroup 6, build 3 |
| 20V 4000 R63L | 20 | V | rail | subgroup 6, build 3 |
How Each Model Code Reads
- 8V 4000 R43: 8 cylinders in V arrangement, Series 4000, rail application (R), subgroup 4, build generation 3
- 8V 4000 R43L: 8 cylinders in V arrangement, Series 4000, rail application (R), subgroup 4, build generation 3, increased rating (L)
- 12V 4000 R43: 12 cylinders in V arrangement, Series 4000, rail application (R), subgroup 4, build generation 3
- 12V 4000 R43L: 12 cylinders in V arrangement, Series 4000, rail application (R), subgroup 4, build generation 3, increased rating (L)
- 16V 4000 R43R: 16 cylinders in V arrangement, Series 4000, rail application (R), subgroup 4, build generation 3, rating variant R
- 16V 4000 R43: 16 cylinders in V arrangement, Series 4000, rail application (R), subgroup 4, build generation 3
- 16V 4000 R43L: 16 cylinders in V arrangement, Series 4000, rail application (R), subgroup 4, build generation 3, increased rating (L)
- 20V 4000 R43: 20 cylinders in V arrangement, Series 4000, rail application (R), subgroup 4, build generation 3
- 20V 4000 R43L: 20 cylinders in V arrangement, Series 4000, rail application (R), subgroup 4, build generation 3, increased rating (L)
- 20V 4000 R63R: 20 cylinders in V arrangement, Series 4000, rail application (R), subgroup 6, build generation 3, rating variant R
- 20V 4000 R63: 20 cylinders in V arrangement, Series 4000, rail application (R), subgroup 6, build generation 3
- 20V 4000 R63L: 20 cylinders in V arrangement, Series 4000, rail application (R), subgroup 6, build generation 3, increased rating (L)
Full parts list for this model family: MTU 4000 R43 to R63R Parts List
Engine-series references do not confirm every installation. Final fitment of 5240332630 depends on the full engine serial number and assembly position.
Common Replacement Scenarios
This part is commonly replaced when:
- bearing clearance, surface scoring, or abnormal crankshaft/camshaft wear is found during overhaul
- standard or size-grade selection must be confirmed before shipment
- buyers need matched bearing references for the same overhaul kit
Usually Ordered with Crankshaft Bearing Aux PTO End
Main and thrust bearings are checked and replaced as a set per journal type. These MTU 4000 references are commonly checked in the same job; each still needs its own fitment check.
- 5240332608 Thrust Bearing, Size 0-1, UP/RIL
- 5240332730 Crankshaft Bearing Driving End
- 5240333407 Thrust Bearing, Size 0-1, LO/SPT
- 5240336602 Crankshaft Bearing Lower Half
- 5240336702 Crankshaft Bearing Size 0-1
- 5240384110 Conrod Bearing Upper Half
Cross-Reference and Superseded Part Numbers
Catalog history distinguishes earlier and later numbers where documented. Reference-only entries do not establish replacement direction or interchangeability. Confirm the offered number against the engine serial number and installation.
| Part number | Catalog relationship |
|---|---|
| 5240332030 | Reference only; direction unconfirmed |
Common Applications
- Engine overhaul
- Crankshaft service
- Marine and industrial engines
Information to Send for Quotation
- Exact part number: 5240332630
- Part name or assembly position: Crankshaft Bearing Aux PTO End
- Engine model / series: MTU 4000
- Engine serial number from nameplate
- Old-part photo showing number, connector, port, or size marking
- Required quantity and whether partial shipment is acceptable
- Destination country, delivery deadline, and preferred shipping method
The quotation confirms the offered part number, supply condition, price, lead time, and shipping options.
Ordering Notes
For 5240332630, send the engine model, serial number, quantity, old-part photo, and destination country. We will confirm whether the item is OEM, OEM-alternative, reman, or superseded before quotation.
5240332630 FAQ
Does 5240332630 fit MTU 4000?
5240332630 Crankshaft Bearing Aux PTO End is checked against MTU 4000. Final fitment depends on the engine serial number, rating, and installation position.
What information is needed to quote 5240332630?
Send the part number, engine model, engine serial number, old-part photo, quantity, destination country, and required delivery date. This lets us confirm stock route, packing, and shipping options.
Can you check alternatives or superseded numbers for 5240332630?
5240332630 may relate to 5240332030. Final replacement status is checked against the engine serial number before quote.
When is 5240332630 usually replaced?
bearing clearance, surface scoring, or abnormal crankshaft/camshaft wear is found during overhaul; standard or size-grade selection must be confirmed before shipment; buyers need matched bearing references for the same overhaul kit.
Verification Notes
- For 5240332630, confirm engine model, serial number, required quantity, and destination before ordering.
- If 5240332630 markings or replacement status are unclear, send old-part photos or nameplate details.
- Priority item: part number, supersession, and export packing details are checked before quote.
- Confirm engine model, serial number, required quantity, and destination before ordering.
- Send old part photos or nameplate details when markings or replacement status are unclear.
- Also catalogued as: Crankshaft Bearing Free End.
Related MTU Parts
Similar to Crankshaft Bearing Aux PTO End by engine series or category.
Other Service Parts in This Engine Series
Related MTU 4000 service categories. Each item requires its own fitment check.
Browse More MTU Parts
All MTU part numbers / MTU spare parts / MTU 4000 Series Overhaul Parts Guide / Check this part