X51199100026 Strainer. Listed in MTU 2000 catalog references; confirm installation and current availability before ordering.
Check X51199100026 availability: Start with X51199100026 and the quantity. Add an engine serial number or a photo of the old Strainer if available; we will follow up on any missing details.
X51199100026 Specification
About X51199100026 - Strainer
Published catalog details are identification references. They do not establish current stock, supplied condition, or confirmed fitment for your engine.
X51199100026 is a strainer catalogued for MTU 2000 engines. The catalog unit weight is 0.116 kg, which we use to estimate freight before quoting.
Technical Notes: Filters
Oil, fuel, and air filters protect the most expensive parts of the engine: bearings, injectors, and turbochargers. MTU specifies filter fineness and capacity for each series, and fuel filtration in particular is matched to the injection system, because common-rail injectors tolerate far less contamination than older pump-and-nozzle systems.
When This Type of Part Is Usually Replaced
- the scheduled service interval in the maintenance schedule is reached
- the differential-pressure indicator or a filter alarm signals restriction
- fuel contamination, water in fuel, or a dust ingress event has occurred
Checks Before Ordering
- Replace primary and secondary fuel filters together unless the maintenance schedule says otherwise
- Easy-change and spin-on versions of a filter are not always interchangeable on the same housing
- Keep one complete filter set per engine on board or on site for unplanned changes
Engine Catalog References
X51199100026 is listed for 12 engine models in the catalog references. The specification table decodes each model code from the fitment list; it does not confirm every installation.
| Model | Cylinders | Arrangement | Application | Group / build |
|---|---|---|---|---|
| 8V 2000 M72 | 8 | V | marine | subgroup 7, build 2 |
| 10V 2000 M72 | 10 | V | marine | subgroup 7, build 2 |
| 12V 2000 M93 | 12 | V | marine | subgroup 9, build 3 |
| 16V 2000 M93 | 16 | V | marine | subgroup 9, build 3 |
| 12V 2000 M92 | 12 | V | marine | subgroup 9, build 2 |
| 16V 2000 M92 | 16 | V | marine | subgroup 9, build 2 |
| 12V 2000 M72 | 12 | V | marine | subgroup 7, build 2 |
| 16V 2000 M72 | 16 | V | marine | subgroup 7, build 2 |
| 8V 2000 M94 | 8 | V | marine | subgroup 9, build 4 |
| 8V 2000 M84 | 8 | V | marine | subgroup 8, build 4 |
| 8V 2000 M84L | 8 | V | marine | subgroup 8, build 4 |
| 12V 2000 M61 | 12 | V | marine | subgroup 6, build 1 |
How Each Model Code Reads
- 8V 2000 M72: 8 cylinders in V arrangement, Series 2000, marine application (M), subgroup 7, build generation 2
- 10V 2000 M72: 10 cylinders in V arrangement, Series 2000, marine application (M), subgroup 7, build generation 2
- 12V 2000 M93: 12 cylinders in V arrangement, Series 2000, marine application (M), subgroup 9, build generation 3
- 16V 2000 M93: 16 cylinders in V arrangement, Series 2000, marine application (M), subgroup 9, build generation 3
- 12V 2000 M92: 12 cylinders in V arrangement, Series 2000, marine application (M), subgroup 9, build generation 2
- 16V 2000 M92: 16 cylinders in V arrangement, Series 2000, marine application (M), subgroup 9, build generation 2
- 12V 2000 M72: 12 cylinders in V arrangement, Series 2000, marine application (M), subgroup 7, build generation 2
- 16V 2000 M72: 16 cylinders in V arrangement, Series 2000, marine application (M), subgroup 7, build generation 2
- 8V 2000 M94: 8 cylinders in V arrangement, Series 2000, marine application (M), subgroup 9, build generation 4
- 8V 2000 M84: 8 cylinders in V arrangement, Series 2000, marine application (M), subgroup 8, build generation 4
- 8V 2000 M84L: 8 cylinders in V arrangement, Series 2000, marine application (M), subgroup 8, build generation 4, increased rating (L)
- 12V 2000 M61: 12 cylinders in V arrangement, Series 2000, marine application (M), subgroup 6, build generation 1
Full parts list for this model family: MTU 2000 M61 to M94 Parts List
Engine-series references do not confirm every installation. Final fitment of X51199100026 depends on the full engine serial number and assembly position.
Usually Ordered with Strainer
Filters are changed with their housing seals, often as a full filter set. These MTU 2000 references are commonly checked in the same job; each still needs its own fitment check.
- 0000180680 Gasket
- 0000943268 Air Filter Restriction Indicator
- 0020921901 Spin-On Fuel Filter
- 0031845201 Spin-On Oil Filter
- 05132155 Sealing Ring
- 5241840501 Lube Oil Full-Flow Filter
Cross-Reference and Superseded Part Numbers
Catalog history distinguishes earlier and later numbers where documented. Reference-only entries do not establish replacement direction or interchangeability. Confirm the offered number against the engine serial number and installation.
| Part number | Catalog relationship |
|---|---|
| X51199100023 | Reference only; direction unconfirmed |
Common Applications
- Scheduled maintenance
- Fleet service programs
- Marine engine rooms
- Generator servicing
Information to Send for Quotation
- Part number: X51199100026
- Engine model, rating, and serial number
- Nameplate photo and old part photo when available
- Quantity, destination country, and required delivery date
The quotation confirms the offered part number, supply condition, price, lead time, and shipping options.
Verification Notes
- For X51199100026, confirm engine model, serial number, required quantity, and destination before ordering.
- If X51199100026 markings or replacement status are unclear, send old-part photos or nameplate details.
Related MTU Parts
Similar to Strainer by engine series or category.
Other Service Parts in This Engine Series
Related MTU 2000 service categories. Each item requires its own fitment check.
Browse More MTU Parts
All MTU part numbers / MTU spare parts / MTU 2000 Series Overhaul Parts Guide / Check this part