A 2000-series overhaul parts list is not one purchase — it is a core list that is always replaced plus a set of positions that only get added once the engine has been measured. The core list is predictable: gaskets and seal sets, pistons, liners and rings, bearings, and the wear items around them. The variable list covers whatever the measurements turn up: valve components, injectors, turbocharger condition, sensors that have been disturbed, and anything that has been superseded since the last overhaul.
The value of separating the two is commercial. Order only the core list and you will almost certainly place a second order mid-job; order everything including the maybes and you will hold inventory you never fitted. This guide sets out the groups, marks which are scope-dependent, and lists the catalogued 2000-series positions we supply. The parts table is generated from live catalog records — no invented entries.
Parts listed 160 catalog records Fitment check By engine serial number Supersessions Traced before quoting Maintained by The Diesel Part Source parts desk
Split the list into core and measured positions
- Core: gaskets and seal sets, pistons, liners, rings, and main and big-end bearings
- Core: service items replaced during the job — filters, coolant hoses, belts, and fasteners disturbed
- Measured: valve-train components, quoted after the workshop reports condition
- Measured: injectors and fuel-system positions, quoted against serial range and test evidence
- Measured: turbocharger condition — cartridge, assembly, or leave in service, decided on inspection
- Consumables that must not be reused: one-time-use bolts, seals, and gaskets listed explicitly
- Sensors disturbed during disassembly, priced as a line rather than assumed reusable
Send the engine serial number with the core list and we return it with variant confirmation, grade per line, and availability. The measured positions can then be added as findings come in, against the same serial range, without re-checking the whole order.
Parts We Supply for This Series
The groups below are generated from catalog records listed under this engine series
(160 part numbers). Open any number for fitment, weight, HS code, and
interchange details, or browse the full
MTU 2000 Series Parts Catalog.
Tools and supplies (1)
| 40041 | Molykote G-N Plus Paste |
FAQ
Do you sell a complete MTU 2000 overhaul kit?
We can quote a complete set for a specific engine and scope, but we do not sell a generic "2000 overhaul kit" — the contents depend on the variant, the serial range, and what the workshop finds. That is also why our quotes arrive itemized rather than as one bundled number.
What is usually missing from a parts list that comes from a previous supplier?
Consumables that must not be reused — one-time bolts, seals, and disturbed sensors — and superseded numbers that were carried forward unchanged. Both are cheap to catch at quote stage and expensive to discover during reassembly.
Can I add positions to an existing quote?
Yes. Send the additional positions against the same engine serial number and we extend the same quotation, so the availability picture stays consistent across one order rather than splitting into two.
How far ahead should the long-lead positions be ordered?
Start the availability check on high-value assemblies before the engine is open. Seals, filters, and fasteners follow the scope and can be quoted quickly once the findings arrive.
Send your engine details: Model, serial number, and the positions you need — we verify fitment and supersessions, then quote with availability per line.